How Do I Increase The Range Of My Garage Door Opener

How Do I Increase the Range of My Garage Door Opener

A common problem among homeowners is having an inefficient, if not defective, garage door opener.

This decreases the range of what the garage door receiver is able to pick up from the remote and hinders the functionality of the remote. 

Although, there are a few ways to increase or even fix the issues of how the range that the garage door remote is able to send.

There might also be several external factors that can disrupt the signal it’s able to send. Another factor can also be the battery in the remote which can lower the signal it sends to the receiver if it’s already drained or damaged.

In order to troubleshoot this problem, we’re going to show you a quick step-by-step guide into increasing the range of your garage door opener. 

Steps to Increase the Range of the Garage Door Opener

In this step-by-step guide that we’re going to show to you, we’re going to give you a few options in order to help you save your budget on buying a new remote.

Some of these solutions won’t even cost you anything as you’ll only need to do a few tweaks in your garage and garage door opener to increase the range.

Step 1

Image Credits: Garage Solutions

Change the batteries of your remote. This should be the first thing that you need to do as it’s the cheapest way to increase the range of your garage door remote.

The power in sending the signal to the garage door fully depends on the batteries’ voltage. The higher the voltage of the battery, the wider the range. 

There are also ties where there’s only a little power left in the battery which can weaken the amount of power it can give. It’s a good idea to bring the remote to your local battery dealer and ask for any recommendation for a battery that has a higher voltage in it.

What’s good is that they have a better understanding of batteries so they’ll be able to show you a few alternatives.

To change the batteries, all you need to do is to remove the cover at the back of the remote. If the remote is using a twist-lock as a cover, use a screwdriver or coin to twist the lock and it’s going to easily come off.

Proceed to replace the battery with the new one and make sure that it’s in the right position.

Step 2

Image Credits: Pinterest

Take out every possible barrier from where you usually use the remote to the door. Objects such as heavy metals like lead and materials such as concrete can hinder the signal that’s being sent by the remote to the transmitter.

Make sure that nothing is blocking the garage door receiver to get the signal that’s being sent by the remote. A good idea to do this is to relocate them into another section of the garage so you can still store and keep your garage clean.

It’s a good idea to keep the area where the garage door transmitter is placed as clear as possible.

There shouldn’t be anything that’s blocking it in order for the signal to be properly received. Some people make the mistake of placing overhead storage spaces in front of it which can actually block the signal of the remote.

Step 3

Check for any electrical components around the area that may cause interference as it can lower the chances of the signal being detected. Electrical interference can be appliances such as:

  • TV Caple
  • Surge Protectors
  • LED Lights
  • Chargers
  • Alarms
  • Sprinklers
  • Freezers

If you’ve noticed that you’re suffering from infrequent range issues after installing any of these close to your garage they might be the problem. A lot of appliances these days can actually cause a lot of electrical interference with remote control signals.

Do a bit of research or contact a professional to ask for advice regarding the electrical layout of your house. It’s a good idea to reroute the layout of your home in order to decrease the remote control signal that’s interfering with your garage door opener. 

There’s also a good chance that the electronics from your neighbor’s home is too close from your garage door opener. Try to check it out and try to adjust or ask your neighbor that it’s affecting the performance of your electrical appliances.

Step 4

Image Credits: Hackaday

Change the position of the garage door opener remote control so that it’s able to properly send out the signal to the receiver.

There’s a chance that you’ve placed and positioned it in your car which is pointing in the wrong direction. This lowers the range of signals that the remote is able to send out to the receiver.

Make sure that the remote control isn’t placed down on the floor or in the wrong angle. It’s also best that the remote isn’t being blocked by anything such as the engine block or other thick surfaces of the car.

Try to use the garage door opener remote in a way that nothing is blocking its signal. A good way to do this is by pressing it in front of the windshield so that you can clearly see that there’s nothing that’s blocking the way.

Maximum Distance of a Remote

There are a lot of factors involved in how far a garage door remote is able to send a signal. Though, the minimum distance of how far the internal receiver of an opener can get the signal of a remote is about 4-5 car lengths away.

The remote was designed to be like this as it’s meant to function properly when you’re close enough to send a signal to the receiver once

Conclusion

If this guide isn’t able to solve your issue with the range of your garage door remote then you can opt to buy a new one. Some garage door remotes are able to send signals which are farther away compared to what you’re currently using.


Jomar Teves